| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1534594-1 |
| SKU: | AMP1534594-1 |
1534594-1
| Heilind Number: | AMP1534594-1 |
| Manufacturer: | TE Connectivity |
| Manufacturer Number: | 1534594-1 |
| Datasheet: | Material Declaration (XLSX) |
| ECAD Model: | |
Description:
MCON 1.2 CB REC SRC SN
Specifications
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 09/29/2023 | P-23-024933 - Adding Alternate source. FOR CUSTOMERS IN NA REGION ONLY! Adding TE-Shanghai, China for alternate source. | Download | |||
| 09/22/2023 | P-23-024932 - Adding alternate MFG source. FOR CUSTOMERS IN NA REGION ONLY! Adding TE Brazil for alternate manufacturing source. PN is currently in series production at that location. | Download | |||
| 04/21/2023 | P-22-023798 - Product Improvement. Inserts adjustment to improve mold performance. Transfer tool from EMP to HMO to keep production. | Download | |||
| 04/20/2023 | P-23-024253 - Change in Delivery Unit & Minimum Order Quantity. This product change notification (PCN) is to inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of April 20, 2023 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. | Download | |||
| 03/29/2023 | P-23-024333 - Product Improvement. Addition of CH values for CFA standard used parts, short-circuit Variant. New variants for CFA standard used parts added PCN Classification: no Form Fit Function Change. | Download | |||
| 02/16/2023 | P-23-024078 -Cancellation of Packaging QTY Change. This Product change notification (PCN) is to inform you about cancellation of following PCN: PCN-22-023382. Please cancel this PCN in your system. The packaging quantity remains unchanged for below listed PNs | Download | |||
| 12/26/2022 | P-22-023797 - Product Improvement. To continue supporting customer demand it is important that we qualify all global supply sources of product to drive quicker supply chain recovery. The scope is to approve the tool that runs in our China region for parts that are currently purchased to aid in speedy recovery of parts and have a greater ability to service demand spikes in the future | Download | |||
| 12/19/2022 | P-22-023382 - Packaging QTY change. n order to assure standardized and uniform packaging for each basic product part number and to improve sustainability we will increase the quantity from 10.000 pcs to 11.000 pcs/reel and therefore from 40.000 pcs to 44.000 pcs/reelbox. Minimum order quantity (MOQ) will be changed from 10.000 pcs to 11.000 pcs (equal to the reelbox). Dimensions and material of reel and shipping box will stay the same. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. Internal release process is ensured by TE. In first shipments after change introduction a mixed shipment might occur (reels with old and new quantities). Reels and boxes labeling will contain correct information. The change has no impact to form fit function. | Download | |||
| 08/12/2022 | P-22-022853 - Product improvement.In addition to the above, please note that this change will become effective on the date listed in this notification for listed part numbers and minimum order quantities. TE will not be liable for any orders placed for shipments after this date that do not meet our new minimum order requirements or other related impacts, e.g., scorecard performance associated with over-shipment quantities. TE is changing its system as it relates to minimum order quantities for the part numbers listed to address trends that have been recently observed. We have identified situations where quantities can be ordered at quantities below what our standard packaging requirements allow. The situation also results in non-standard handling (break-pack) and creates risks for damage during transit to our customers. Therefore, we are making changes to align minimum order quantities with appropriate standard packaging requirements for these part numbers. | Download | |||
| 05/16/2022 | P-22-022373 - Tool\process transfer. we hereby inform you about tool and/or process transfers within TE Connectivity. As a result of a thorough analysis of our global operations and footprint matching the customer needs in a global supply chain, we are going to reorganize our EMEA manufacturing sites. These reorganizations will support the need of our customers for shorter lead-times and optimized value streams, which are not only generating efficiencies, but also consistency in quality and reducing our CO2 footprint by avoiding unnecessary transportation. | Download | |||
| 03/25/2021 | P-21-020510-2 - New Specification. TE Suzhou Process Label scan system update. TE Suzhou label Layout optimize and QR Code & Barcode optimize Barcode change to LT(3S) CODE QR code change to Part Number+ Package QTY+ PO Number+ Ver +date code+ Serial Number（0001~9999） This label change Not accept re-submit PPAP/PSW request | Download | |||
| 10/31/2020 | P-20-019471 - Localization of tools and/or processes. Copied 1 die number 11-1940222 in Suzhou and ONLY supply AP (that is only asain-pacific) customer: So for AP customers, if they want to purchase the parts which was mentioned in this PCN, please note that these part numbers will be produced with location change from TE Europe to TE Suzhou. | Download | |||
| 09/30/2020 | P-20-018731 - Product improvement. Transfer of stamping dies from Burgess Rd. to further improve our Supply Chain towards our customers. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products. The receiving manufacturing location operates under a certified quality management system in accordance with standard automotive requirements. | Download | |||
| 03/31/2020 | P-19-018403 - Manufacturing location change. Transferring from TE Connectivity Woert (D) TE Connectivity Braganca (BR) | Download | |||
| 02/24/2020 | P-19-018148 - Product improvement.Capacity. As a result of our continuous strive for improving our delivery and meet our customers' demand needs, we hereby inform you of a new capacity die to support our customers. | Download | |||
| 01/20/2020 | P-19-018137 - Product Improvement. | Download | |||
| 01/15/2019 | P-18-016572 - Duplication of Production Tooling. AFFECTS CUSTOMERS SHIPMENTS WITHIN ASIA PACIFIC ONLY - Distribution Center change from TE Suzhou China to ASIA PACIFIC Market. | Download | |||
| 06/14/2018 | P-18-015955 - For China local customer requirement on localization Mcon 1.2 CB , new duplication production tool (11-1934527) in TE Suzhou plant for production to support Asia-Pacific market. this duplication die involve below part numbers :1670144-1& 1670144-3& 1534594-1. | Download | |||
| 02/08/2018 | P-17-014723 - New Tooling. As a result of our continuous strive for capacity increase of our production, we hereby inform you upfront about a new tool 11-1829574, which is under construction In order to meet all specification requirements to cover increasing market demand and which will run in addition to the current one. | Download | |||
| 04/28/2014 | P-14-009872 - Document clarification. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |