| Effective Date | Description of Change | Download |
| 3/2/2018 | P-18-015537 - The supply of dye paper was cut off by a Korean paper company.
Therefore, it is necessary to use a non-dye source as an alternative raw material. The composition and experiment data of all original sources are very similar.
It has nothing to do with the form, fit and function of the product. | 170328-1 |
| 3/2/2018 | P-18-015538 - The supply of dye paper was cut off by a Korean paper company.
Therefore, it is necessary to use a non-dye source as an alternative raw material. The composition and experiment data of all original sources are very similar.
It has nothing to do with the form, fit and funtion of the product. | 170328-1 |
| 4/11/2016 | P-16-012580 - UPDATE TO PCN P-16-012528. To ensure a smooth and stable transition from SWDC to EPDC, TE will be delaying the transition from the current Santa Teresa, NM DC (SWDC) to the new El Paso, TX DC (EPDC), originally scheduled to implement February 8th - 15th, is now scheduled to implement April 11th - 15th. This delay will allow extended testing on all SAP systems and procedures to ensure a seamless transition into the new warehouse. As we migrate the product and go-live on the new SAP WM software, it is critical to ensure this testing and training is fully incorporated into the systems and operational processes in the new El Paso warehouse. Based on the revised timing of transition, both Customer Shipments and Supplier Deliveries will continue to process from the Santa Teresa, NM location: Address: 101 Lindbergh, Santa Teresa, NM 88008, DUNS Code: 036967748. See attached Customer Letter. | 170328-1 |
| 2/15/2016 | P-16-012528 - Location Change. TE has established a new Distribution Center in El Paso, TX to support our South-West Customers. The transition to El Paso will take place during the weekend of February 13th - 14th. | 170328-1 |
| 1/1/2016 | E-15-011713 - Product Improvement. In an effort to standardize raw material on a global basis. TE Connectivity has completed a review of our current material standards for Brass connectors. This review has resulted in our design to reduce the number of regional alloys and align at the global level by standardizing on C27400 alloy. | 170328-1 |
| 7/31/2014 | E-14-009319 - Document Clari?cation. Part and Drawing revision mismatch.
| 170328-1 |
| Mfg Part # |
Descriptiontop |
| 1-160759-1 |
POSITIVE LOCK 250 REC 0.5-1.5MM2 PTPBR |
| 1-172469-1 |
PL 250 HOUSING NATURAL 6/6 NYLON |
| 1-176497-1 |
PL EX 250 REC HSG 1P NYLON NAT |
| 1217094-1 |
RCPT 250 POS-LOCK 18-14 0126BR |
| 1217114-2 |
REC 187 POS-LK MIII TPBR 18-14 |
| 1217378-1 |
RCPT 250 POS-LOCK 22-18 0126BR |
| 154717-1 |
PL 250 REC TERMINAL 13-11 AWG BR |
| 154717-3 |
PL 250 REC TERMINAL 14-11 AWG TPBR |
| 154718-3 |
PL 250 REC 0.7-2.0 MM2 0.406 TPBR |
| 154719 |
PL 250 REC HSG 1P NYLON BLACK |
| 154719-1 |
PL 250 REC HSG 1P NYLON NAT |
| 165536-1 |
PIDG POS.LOCK ASSY |
| 170326-1 |
PL 187 REC 18-14 AWG 0.3 X 14.0 PTPBR |
| 170326-1 |
PL 187 REC 18-14 AWG 0.3 X 14.0 PTPBR |
| 170454-2 |
PL 250 AM REC 18-14 0.40 X 21 PRE-TPBR |
| 170456-2 |
PL 250 AM REC 12-10 0.40 X 21 PRE-TPBR |
| 172074-1 |
POSITIVE LOCK 187 HOUSING RECEPTACLE |
| 172075-1 |
POSITIVE LOCK 187 HOUSING RECEPTACLE |
| 172076-1 |
POSITIVE LOCK 250 HOUSING RECEPTACLE |
| 172320-2 |
POSITIVE LOCK 250 (6.3 MM) HOUSING |
| 172763-1 |
PL 250 FLAG REC 18-22 0.40 X 49.2 PTBR |
| 172796-1 |
PL 312 FLAG REC 20-14 0.32 X 24.9 PTPBR |
| 173691-1 |
PL 187 REC 20-16 AWG 0.3 X 14.0 PTBR |
| 173722-1 |
PL EX 187 REC 26-20AWG PTBR |
| 175024-1 |
PL 250 REC 15-10 AWG 0.40 X 52.0 PTBR |
Yes
