| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1924464-2 |
| Amperage: | 13 A |
| Termination Method: | Crimp |
| Contact Plating: | Tin |
| Operating Temperature Range: | -40 - 120 °C, -40 - 248 °F |
| Wire Size: | 18 - 20 AWG, .51 - .82 mm² |
| Crimp Type: | F-Crimp |
| Terminal Primary Locking Feature: | Clean Body |
| Terminal / Splice Type: | Socket |
| Product: | Automotive, Truck, Bus, & Off-Road Terminals |
| SKU: | AMP1924464-2 |
| series: | AMPSEAL 16 |
| Interface Plating: | Nickel (Ni) |
| Mating Pin Diameter: | 1.588 mm / .0625 in |
| Wire Insulation Diameter: | 2.26 - 3.32 mm / .089 - .131 in |
| Wire Size Search: | 18 AWG / 19 AWG / 20 AWG / .5 mm² / .6 mm² / .75 mm² |
| Terminal Transmits: | 0 - 24 A (Low Power) |
| Wire Type: | Copper |
| Sealable: | No |
| Receptacle Style: | 180° |
1924464-2
Specifications
Detailed Description
Enhance your electrical assembly with this high-quality SOCKET, designed for optimal performance in automotive, truck, bus, and off-road applications. With a durable construction and RoHS compliance, this component ensures reliable connectivity while meeting environmental standards. Featuring a 13A amperage and tin contact plating, it guarantees efficient power transmission. The F-Crimp termination method and Clean Body locking feature offer secure and stable connections, while the socket splice type accommodates 18-20 AWG wire sizes. Operating flawlessly in a wide temperature range from -40 to 120°C (-40 to 248°F), this assembly is suitable for diverse operating conditions. Upgrade your automotive systems with this essential connector for seamless functionality.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 103653-1 | 02 MTE SHRD PIN HSG SR LATCH |  |
 | TE Connectivity 104483-1 | 08 SHORT PT RCPT HSG DR .100CL | |
 | TE Connectivity 1241608-1 | NQS1,5 SN REC CB UNSEAL. 0,75-1,5 | |
 | TE Connectivity 1375819-1 | CST-100 II CONTACT TIN PLT | |
 | TE Connectivity 1418882-1 | COVER FOR 62POS.REC.HSG | |
 | TE Connectivity 1658641-2 | HDP-20,PLUG,SIZE 5, 50 POSN | |
 | TE Connectivity 2-1375820-0 | CST-100 II HOUSING 20 POS | |
 | TE Connectivity 206322-9 | CABLE CLAMP SIZE 17 | |
 | TE Connectivity 3-1447221-4 | S/S CONN REC CONTACT ASSEMBLY | |
 | TE Connectivity 42238-2 | FF 250 REC 18-14AWG TPBR PRE CRIMPED | |
 | TE Connectivity 776164-1 | 35POS,AMPSEAL,SOC HSG ASSY,SLD,COD 1 | |
 | TE Connectivity 776437-1 | AS 16, 12P PLUG ASSY, KEY 1 | |
 | TE Connectivity 776531-1 | AS 16, 6P PLUG ASSY, RD, KEY 1 | |
 | TE Connectivity 776533-1 | AS 16, 12P PLUG ASSY,RD,KEY 1 | |
 | TE Connectivity RNF-100-3/32-0-SP | RNF-100-332-0-SP | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 12/30/2024 | P-24-027077 - Packaging Change. This is a notice of packaging change which contains stamped product reels for shipping. This change is specific to the reel flange which holds the stamped product associated with this notification. | Download | |||
| 08/31/2022 | PCN-22-147458 - Revision Alignment. TE Connectivity is making a change to the part number revision letter only to align with our new internal production drawing. fit, form or function of these part numbers are not affected. You will not see any change to the parts delivered to you except for the revision letter. IMPORTANT: The new and previous revisions of these parts can be used interchangeably in the field and previous revision can remain stocked until use. Shipments of both configurations may be mixed. | Download | |||
| 06/10/2022 | PCN-22-140274 - Tool ID Mark Being added. The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to include a Tool ID mark for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP requests (no samples) must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing are affected. | Download | |||
| 09/03/2021 | PCN-21-106049 - Manufacturing change. adding duplicate capacity tooling at an approved outside vendor located in York, PA, for the listed part numbers while continuing to produce these parts at the current Greensboro, NC, TE Connectivity manufacturing location. These PN's are TEC proprietary designs, therefore considered catalog/general market product. TEC reserves the right to move tool back to prior location/supplier based on business need. An internal release based on our specifications will be executed before any parts will be delivered, which guarantees product performance. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. | Download | |||
| 05/31/2021 | E-21-002451 - Manufacturing location change. The Industrial and Commercial Transportation business unit is relocating a duplicate assembly machine to a TE Connectivity approved outside vendor. The equipment being relocated is one of three identical machines used to apply sleeves to create completed socket assemblies. Two machines will remain at the 719 Pegg Road, Greensboro, NC, TE Connectivity location which will allow production of the subject parts in both locations simultaneously. | Download | |||
| 09/30/2020 | P-20-018730 - Product Improvement. Transfer of stamping dies from Burgess Rd. to further improve our Supply Chain towards our customers. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products. The receiving manufacturing location operates under a certified quality management system in accordance with standard automotive requirements. | Download | |||
| 09/14/2018 | P-18-015882 - Product improvement. The addition of a second forming die will better allow TE Connectivity to meet current demands and serve future needs of customers. | Download | |||
| 07/31/2017 | P-17-014635 - Product improvement. These efforts will position us better to serve your future needs. The outside supplier operates under a certified quality management system in accordance with standard automotive requirements. | Download | |||
| 07/31/2017 | P-17-014636 - Product improvement. These efforts will position us better to serve your future needs. The outside supplier operates under a certified quality management system in accordance with standard automotive requirements. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |