| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 776438-1 |
| Series: | AMPSEAL 16 |
| Gender: | Housing for male terminals |
| Number of Rows: | 2 |
| Pitch: | .177 in, 4.5 mm |
| Voltage: | 250 VDC |
| IP Rating: | IP67 |
| Strain Relief: | Add By Accessory |
| Row Spacing: | .209 in, 5.3 mm |
| Polarization: | Yes |
| Body Material: | PBT GF |
| Number of Positions: | 12 |
| Operating Temperature Range: | -40 - 125 °C, -40 - 257 °F |
| Sealable: | Yes |
| Connector System: | Wire to Wire |
| Length: | 1.48 in |
| Cable Exit Angle: | 180° |
| Height: | 1.049 in, 26.65 mm |
| Width: | 1.872 in, 47.55 mm |
| Nominal Voltage Architecture: | 125 V, 12 V, 240 V, 24 V, 42 V, 48 V, 80 V, 90 V |
| Body Color: | Red |
| Serviceable: | Yes |
| Mating Pin Diameter: | .059 in, 1.5 mm |
| Connector Code : | 1 |
| Mounting Feature: | Without |
| Terminal Position Assurance: | Yes |
| Connector Position Assurance Capable: | Yes |
| Hybrid Connector : | No |
| Primary Locking Feature: | Integrated in Housing |
| Material Flammability Standard: | UL 94-HB |
| Part Aliases: | 776438-1 |
| SKU: | AMP776438-1 |
776438-1
Specifications
Detailed Description
Enhance your automotive connectivity with this AMPSEAL 16 assembly, featuring a housing designed for male terminals. With two rows and a 4.5mm pitch, it offers 12 positions for secure wire-to-wire connections. Constructed from durable PBT GF material with an IP67 rating, it ensures reliable performance in industrial and commercial transportation settings. Operating seamlessly in temperatures ranging from -40 to 125°C, this assembly is not only serviceable but also RoHS compliant. Its integrated locking feature, alongside terminal position assurance, guarantees a secure fit. The red housing, with a 180° cable exit angle, adds a pop of color and practical functionality to your setup. Trust in this assembly for efficient power transmission at voltages up to 250 VDC.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-1703639-1 | 12POS,AMP MCP1.5K,REC HSG,ASSY |  |
 | TE Connectivity 281934-3 | SINGLE WIRE SEAL | |
 | TE Connectivity 282087-1 | AMP SUPERSEAL 1.5 SERIES 3P PL | |
 | TE Connectivity 282105-1 | AMP SUPERSEAL 1.5 SERIES 3P CA | |
 | TE Connectivity 282110-1 | MINI MIC RCPT CONTACT | |
 | TE Connectivity 776363-1 | SEALING PLUG, SZ 16 CAVITY | |
 | TE Connectivity 776427-1 | AS 16, 2P PLUG ASSY, KEY 1 | |
 | TE Connectivity 776427-2 | AS 16, 2P PLUG ASSY, KEY 2 | |
 | TE Connectivity 776427-3 | AS 16, 2P PLUG ASSY, KEY 3 | |
 | TE Connectivity 776428-1 | AS 16, 2P CAP ASSY, KEY 1 | |
 | TE Connectivity 776429-1 | AS 16, 3P PLUG ASSY, KEY 1 | |
 | TE Connectivity 776429-2 | AS 16, 3P PLUG ASSY, KEY 2 | |
 | TE Connectivity 776433-2 | AS 16, 6P PLUG ASSY, KEY 2 | |
 | TE Connectivity 776437-1 | AS 16, 12P PLUG ASSY, KEY 1 | |
 | TE Connectivity 776531-1 | AS 16, 6P PLUG ASSY, RD, KEY 1 | |
 | TE Connectivity 794273-1 | 04P UMNL INTERFACE SEAL | |
 | TE Connectivity 794274-1 | 04P UMNL WIRE SEAL | |
 | TE Connectivity 962981-1 | 2,5MMD SOCKET CONTACT | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 07/31/2023 | PCN-23-177272 - Additional manufacturing location. TE Connectivity is introducing an additional manufacturing location in Suzhou, China for the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) are not affected. | Download | |||
| 06/18/2021 | PCN-21-103907 - Material Change. TE Connectivity is making a material change to the AS16 Grommet (Matte) and Peripheral Seal for the part number(s) listed below because of a material supply constraint. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) are not affected by this change. | Download | |||
| 10/18/2019 | E-19-010957 - TE Connectivity is transferring component(s) of the following part number(s) from China to Mexico. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tools back to prior location based on business need. | Download | |||
| 10/29/2018 | E-18-016942 - Distribution Center Change. Due to consolidation of Distribution Centers (DC), TE-ICT is moving the material from our Ontario, CA (USA) DC to our Hermosillo, Sonora, (Mexico) DC. THERE IS NO CHANGE TO MANUFACTURING LOCATION OR TO PARTS! | Download | |||
| 08/20/2018 | P-18-016216 - Manufacturing location change. To continue improving the delivery of Ampseal 16 connectors, we will be relocating four AS16 component molds to another TE facility located in Hemet, California/USA temporarily. The temporary relocation will occur over the next 6 months, returning to the ICT Plant in Empalme, Mx. This change is effective immediately. | Download | |||
| 04/27/2018 | P-17-015262 - Product improvement. TE Empalme Consolidation Project Molding Process. | Download | |||
| 03/19/2018 | P-18-015449 - Manufacturing location change. | Download | |||
| 03/19/2018 | P-18-015534 - Manufacturing location change. (NOTE: This PCN supersedes PCN P-17-015262) | Download | |||
| 11/30/2016 | P-16-013796 - Product improvement. An additional assembly capacity is being added in the existing manufacturing location in order to meet increased global demand for this product. | Download | |||
| 12/06/2013 | E-13-019035 - Product Improvement. PCN already distributed reference P-13-009630. | Download | |||
| 12/02/2013 | P-13-009630 - Product improvement. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |