| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 2-5745174-7 |
| Series: | AMPLIMITE Kit |
| Accessory Type: | Cable Clamp |
| Shell Size: | 4 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 37 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Shielded: | Yes |
| Connector and Contact Terminate To: | Wire & Cable |
| Screw Hole Thread Size: | 4-40 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | 13.46 mm, .53 in |
| Grommets: | Without |
| Cable Clamp Material: | Die Cast |
| Identification Letter: | P |
| Part Aliases: | 2-5745174-7 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP2-5745174-7 |
2-5745174-7
| Heilind Number: | AMP2-5745174-7 |
| Manufacturer: | TE Connectivity |
| Manufacturer Number: | 2-5745174-7 |
| Datasheet: | Statement of Compliance |
| ECAD Model: | |
Specifications
Detailed Description
Secure your cables with ease using this Cable Clamp Kit in Size 4, a essential accessory for efficient cable management. Designed for a Two-Piece RFI/EMI Shield, this kit ensures reliable protection for up to 37 positions. The Nickel over Copper plating with a Bright finish guarantees durability and efficient shielding. Perfect for data and device applications, this kit is an essential component in maintaining a well-organized and secure wiring system. With a 180° cable exit angle and a cable insulation diameter of .53 inches, it offers versatile installation options. RoHS compliant, this Cable Clamp Kit meets strict environmental regulations, making it a responsible choice for your wire and cable management needs.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 104257-4 | 05 MTE RCPT HSG SR LATCH .100 |  |
 | TE Connectivity 1445730-1 | STRN RELIEF ASY,STRT SIZE 8 | |
 | TE Connectivity 1658640-1 | HDP-20,RCPT,SIZE 5, 50 POSN | |
 | TE Connectivity 1658648-1 | KIT,HDP-20,OVRMLD,PLUG,SIZE 3, | |
 | TE Connectivity 1658655-1 | KIT,HDP-20,ENCLSUR,PLUG,SIZE 1 | |
 | TE Connectivity 1658661-1 | KIT,HDP-20,ENCLSUR,PLUG,SIZE 5 | |
 | TE Connectivity 1658673-1 | HDP-22,PLUG,SIZE 4,62 POSN | |
 | TE Connectivity 1658681-1 | HDP-22,RCPT,SIZE 1,15 POSN | |
 | TE Connectivity 202119-2 | PIN HOOD | |
 | TE Connectivity 204351-1 | SZ 22 SOCKET CONTACT | |
 | TE Connectivity 205089-1 | HD 20 PIN CONTACT | |
 | TE Connectivity 205090-1 | HD 20 SOCKET CONTACT | |
 | TE Connectivity 205203-8 | CRIMP SNAP RCPT ASSY,SIZE 1 | |
 | TE Connectivity 205204-9 | CRIMP SNAP PLUG ASSY,SIZE 1 | |
 | TE Connectivity 205206-9 | CRIMP SNAP PLUG ASSY,SIZE 2 | |
 | TE Connectivity 5748676-2 | DIE CAST CBL CLMP KIT,SZ 2 | |
 | TE Connectivity 747784-8 | JACKSCREW KIT,4-40, BULK | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 12/21/2021 | P-21-021935 - Retraction of Obsolete status. This PCN is to revise an error previously released on PCN numbers: P-21-021901, P-21-021902, P-21-021903,P-21-021904, P-21-021905,P-21-021906 & P-21-021907,P-21-021908& P-21-021909, P-21-021910, P-21-021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 12/21/2021 | P‐21‐021935 - Retraction of obsolete. This PCN is to revise an error previously released on PCN numbers: P‐21‐021901,P‐21‐021902,P‐21‐021903,P‐21‐021904,P‐ 21‐021905,P‐21‐021906,P‐21‐021907,P‐21‐021908,P‐21‐021909,P‐21‐021910,P‐21‐021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020808 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
100
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |