| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1-5745172-3 |
| Series: | AMPLIMITE Kit |
| Accessory Type: | Cable Clamp |
| Shell Size: | 2 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 15 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Shielded: | Yes |
| Connector and Contact Terminate To: | Wire & Cable |
| Screw Hole Thread Size: | 14702 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | 10.92 mm, .43 in |
| Grommets: | Without |
| Cable Clamp Material: | Die Cast |
| Part Aliases: | 010-6840-00 1-5745172-3 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP1-5745172-3 |
1-5745172-3
Specifications
Detailed Description
Enhance cable management with the AMPLI CBL CLMP KIT, a crucial accessory for securing cables in place. This Two-Piece RFI/EMI Shield clamp offers reliable protection and organization, making it ideal for a variety of applications. With a shell size of 2 and 15 positions, it ensures a secure fit for your cables. The nickel over copper plating with a bright finish not only provides durability but also enhances connectivity. Designed for easy installation, this kit is essential for maintaining signal integrity and reducing interference. Perfect for data and device applications, it meets RoHS compliance standards, guaranteeing environmental responsibility. Elevate your cable management system with this high-quality accessory.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-206062-4 | CABLE CLAMP KIT #11 |  |
 | TE Connectivity 1-640507-0 | 02P MR II CAP HSG V0 RED | |
 | TE Connectivity 1-640508-0 | 03P MR II CAP HSG V0 RED | |
 | TE Connectivity 1-640509-0 | 04P MR II CAP HSG V0 RED | |
 | TE Connectivity 1-640517-0 | 02P MR II PLUG HSG V0 RED | |
 | TE Connectivity 1658671-1 | HDP-22,PLUG,SIZE 2, 26 POSN | |
 | TE Connectivity 1658673-1 | HDP-22,PLUG,SIZE 4,62 POSN | |
 | TE Connectivity 205089-1 | HD 20 PIN CONTACT | |
 | TE Connectivity 205090-1 | HD 20 SOCKET CONTACT | |
 | TE Connectivity 205205-2 | CRIMP SNAP RCPT ASSY,SIZE 2 | |
 | TE Connectivity 205205-7 | CRIMP SNAP RCPT ASSY,SIZE 2 | |
 | TE Connectivity 205206-3 | CRIMP SNAP PLUG ASSY,SIZE 2 | |
 | TE Connectivity 206429-1 | CPC PLUG ASSY, 11-4, REV SEX | |
 | TE Connectivity 5205207-1 | HD RECPT ASSY SIZE 3 | |
 | TE Connectivity 5748676-1 | DIE CAST CBL CLMP KIT,SZ 1 | |
 | TE Connectivity 5748676-2 | DIE CAST CBL CLMP KIT,SZ 2 | |
 | TE Connectivity 5748676-3 | DIE CAST CBL CLMP KIT,SZ 3 | |
 | TE Connectivity 747784-8 | JACKSCREW KIT,4-40, BULK | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 01/14/2022 | P-21-021906 - Discontinuance. Part status change.The listed part numbers below will be discontinued and no longer available. | Download | |||
| 12/21/2021 | P-21-021935 - Retraction of Obsolete status. This PCN is to revise an error previously released on PCN numbers: P-21-021901, P-21-021902, P-21-021903,P-21-021904, P-21-021905,P-21-021906 & P-21-021907,P-21-021908& P-21-021909, P-21-021910, P-21-021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 12/21/2021 | P‐21‐021935 - Retraction of obsolete. This PCN is to revise an error previously released on PCN numbers: P‐21‐021901,P‐21‐021902,P‐21‐021903,P‐21‐021904,P‐ 21‐021905,P‐21‐021906,P‐21‐021907,P‐21‐021908,P‐21‐021909,P‐21‐021910,P‐21‐021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020806 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
Additional Resources
| Attribute | Value |
|---|---|
| TE Connectivity: | 1-5745172-3 |
| Other Names: | 010-6840-00 |