| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 964326-1 |
| SKU: | AMP964326-1 |
964326-1
| Heilind Number: | AMP964326-1 |
| Manufacturer: | TE Connectivity |
| Manufacturer Number: | 964326-1 |
| Datasheet: | 3D Model (STP) |
| ECAD Model: | |
Description:
STD-POW-TIM CONTACT
Specifications
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-1326031-0 | 2.8MM BLD,SEAL,14AWG,REV REEL |  |
 | TE Connectivity 1-1326032-1 | 2.8MM RECP,SEAL,14AWG,REV REEL | |
 | TE Connectivity 1241390-1 | AMP MCP 2.8K, CONTACT | |
 | TE Connectivity 1393367-1 | V23540X7000Y 11=GET-FEM TERM S | |
 | TE Connectivity 1452299-1 | FEM HSG INLI.ASY12P | |
 | TE Connectivity 173631-6 | 070 MLC REC CONT 20-16 | |
 | TE Connectivity 282466-1 | MINI MIC RCPT CONTACT >1,5- | |
 | TE Connectivity 6-928918-1 | MQS PIN CONTACT | |
 | TE Connectivity 927768-3 | JUNIOR-TIMER KONT | |
 | TE Connectivity 927829-1 | SPT REC 6.3 Contact SRC Sn | |
 | TE Connectivity 927837-1 | STD PW TIMER CONTACT | |
 | TE Connectivity 928962-2 | FF 250 TAB 2.5-4.0MM2 TPBR | |
 | TE Connectivity 929504-7 | 2X11P JUN POW TIMGH | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 02/20/2024 | P-23-025380 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders. | Download | |||
| 02/20/2024 | P-23-025381 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders. | Download | |||
| 12/25/2023 | PCN-23-184317 - Tool Duplication. we would like to inform you with this PCN about introducing a new production tool 11-1963596 at our TE manufacturing location in Suzhou, China. The evaluation of new tool is executed by following A strict procedure. Which guarantees no negative influence on quality, ability to supply and form-fit-function of the concerned products. An internal release based on our specifications will be executed before any parts will be delivered, which guarantees the performance. Upon request, a PPAP level 2 will be available if it concerns a transfer of a tool which produces a finished TE-product. A PPAP level 1 will be available if it concerns a component of a TE-product, where the production location of the finished TE-product remains unchanged. If you require such a PPAP, please notify the responsible TE Sales Contact within 14 calendar days after receipt of this PCN. | Download | |||
| 07/20/2023 | P-23-024531 - Change to DU & MOQ. change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of July 20, 2023 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. No PPAP will be submitted for this PCN. | Download | |||
| 01/11/2021 | P-20-019951 - Tool/ Process Transfer. we hereby inform you about tool and/or process transfers within TE Connectivity. The transfer from TE Steinach(CH) to TE Speyer(DE) follows a strict procedure which fully maintains quality, ability to supply and form-fit-function of concerned products. | Download | |||
| 08/31/2020 | P-20-018846 - Manufacturing location change. will be transferred from TE Montcada to TE Braganza. | Download | |||
| 06/29/2020 | P-20-018844 - Manufacturing location change. will be transferred from TE Montcada to TE Speyer. | Download | |||
| 11/17/2014 | P-14-010695 (xml) - Manufacturing location change (Stamping). Following Part Numbers will be transferred from TE Montcada (Spain) to TE Steinach (Switzerland): 964326-1. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |